Insulating glove tester

Updated 2026-10-27

Data records

  • The test voltage of a glove tester is alternating or direct, a combination tester carries both supplies with a transfer switch between them, and the voltage is raised at a controlled ramp rate to the level set for the class of the item. Source: Von Corporation product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.ac-or-dc-supply
  • Rubber gloves and sleeves are made in several classes, each tested at its own voltage, and an automatic tester selects the predefined test program for the class of the item loaded. Source: Von Corporation product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.glove-classes
  • The tester displays the leakage current of each item digitally and on a bar graph, holds the peak value, and when an item fails flashes the indicator at its position, sounds an alarm and shows which positions failed. Source: Von Corporation product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.leakage-readout
  • An insulating glove tester applies a high test voltage to rubber insulating gloves, sleeves and blankets and measures the leakage current through the rubber, stressing each item beyond its maximum field use to confirm that it will withstand service; with the matching electrodes the same tester covers line hose, hoods and line jumpers. Source: Doble (Phenix Technologies) product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.purpose
  • Gloves issued for service are retested on a fixed cycle, gloves tested but not yet issued carry a shelf life after which they are retested before issue, and blankets in service are retested on a cycle of their own; the intervals are set by the ASTM in-service standards, ASTM F496 for gloves, and enforced through OSHA 1910.137. Source: Honeywell (Salisbury) resource page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.retest-interval
  • A single-position fixture powered by an external high-voltage source tests one glove, sleeve or blanket at a time and is portable, whereas a multi-position automated tester fills, tests and reports on a batch of gloves and sleeves under microprocessor control. Source: Doble (Phenix Technologies) product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.single-vs-multi-position
  • In a glove test each glove is filled with water through a tube and lowered into the tester's water tank, the water inside and outside serving as the electrodes across the rubber wall; water filling is bypassed for sleeve positions and for empty positions. Source: Von Corporation product page, web page edition. Verified 2026-10-27. Record instr.insulating-glove-tester.water-bath-method

Sources

  • Doble (Phenix Technologies) product page, Single-Position Rubber Goods Test Fixture, web page edition, Doble Engineering (Phenix Technologies). Held as: Public page. Publisher page
  • Honeywell (Salisbury) resource page, Safety Standards (personal protective equipment resource library), web page edition, Honeywell (Salisbury). Held as: Public page. Publisher page
  • Von Corporation product page, LSY, MSY, NSY Series rubber goods testers, web page edition, The Von Corporation. Held as: Public page. Publisher page
Changelog (19 entries)
DateRevisionChange
2026-10-27created (instr.insulating-glove-tester.ac-or-dc-supply)
2026-10-27revised (instr.insulating-glove-tester.ac-or-dc-supply)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.ac-or-dc-supply)
2026-10-27created (instr.insulating-glove-tester.glove-classes)
2026-10-27revised (instr.insulating-glove-tester.glove-classes)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.glove-classes)
2026-10-27created (instr.insulating-glove-tester.leakage-readout)
2026-10-27revised (instr.insulating-glove-tester.leakage-readout)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.leakage-readout)
2026-10-27created (instr.insulating-glove-tester.purpose)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.purpose)
2026-10-27created (instr.insulating-glove-tester.retest-interval)
2026-10-27revised (instr.insulating-glove-tester.retest-interval)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.retest-interval)
2026-10-27created (instr.insulating-glove-tester.single-vs-multi-position)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.single-vs-multi-position)
2026-10-27created (instr.insulating-glove-tester.water-bath-method)
2026-10-27revised (instr.insulating-glove-tester.water-bath-method)
2026-10-27review_status unreviewed -> software_reviewed (instr.insulating-glove-tester.water-bath-method)

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Insulating glove tester." Test Instrument Reference. 2026-10-27. https://www.testinstrumentreference.com/instruments/insulating-glove-tester/.