Test Instrument Reference

Requirements for the Calibration of Measuring and Test Equipment

Updated 2026-10-27

Edition timelineRequirements for the Calibration of Measuring and Test Equipment: 200620042005200620072008Requirements for the Calibration of Measuring and Test EquipmentANSI/NCSL Z540.3-2006Requirements for the Calibration of Measuring and Test Equipment2006
Edition timeline. Editions recorded for this standard from the publisher's catalog. The filled dot marks the edition listed as current.
Edition timeline: edition years from the publishers' catalogs; editions without a four-digit year are listed but not plotted.
StandardEditionKindCurrentRecord
Requirements for the Calibration of Measuring and Test Equipment2006Revision ofstd.ansi-ncsl-z540-3.revision-of

Data records

  • The publisher states that ANSI/NCSL Z540.3-2006 addresses supplier and customer alike, each term read in its broadest sense, and is specific to calibration systems. It may be cited by customers and suppliers when specifying products, by legislative or regulatory bodies, by organizations making it a condition of procurement, and by bodies that audit or evaluate calibration systems. Source: ANSI/NCSL Z540.3-2006 (R2013). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.audience
  • ANSI/NCSL Z540.3-2006 is the designation of the American National Standard on the calibration of measuring and test equipment, which the publisher lists with the suffix (R2013). Value: ANSI/NCSL Z540.3-2006. Source: ANSI/NCSL Z540.3-2006 (R2013). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.designation
  • The publisher's journal records that the requirements receiving the most discussion during the development of ANSI/NCSL Z540.3-2006 were its measurement decision risk criteria, its test uncertainty ratios, and the use of calibration laboratories accredited to ISO/IEC 17025:2005. Source: NCSLI Measure Vol. 1 No. 4 (2006). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.development-topics
  • The publisher states that ANSI/NCSL Z540.3-2006 carries forward and updates the requirements on calibration systems for measuring and test equipment that Part II of ANSI/NCSL Z540.1 (R2002) and the earlier United States military calibration standard had described. Value: 2006. Source: ANSI/NCSL Z540.3-2006 (R2013). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.revision-of
  • ANSI/NCSL Z540.3-2006 lays down technical requirements for calibrating measuring and test equipment, organized as a set of functional components that together keep the accuracy and reliability of that equipment in line with its identified performance requirements. Its requirements cover whether equipment performance is acceptable, whether a calibration suits the application it is used for, how measurements relate to the national measurement system, and how results trace to the International System of Units. Source: ANSI/NCSL Z540.3-2006 (R2013). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.scope
  • The publisher lists ANSI/NCSL Z540.3-2006 (R2013) as withdrawn as an active standard in October 2020 and superseded by ISO/IEC 17025:2017. Value: withdrawn October 2020, superseded by ISO/IEC 17025:2017. Source: ANSI/NCSL Z540.3-2006 (R2013). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.status
  • The publisher's journal describes ANSI/NCSL Z540.3-2006 as six clauses covering its scope, its references, terms and definitions, general requirements, calibration system implementation, and calibration system assessment and improvement. Source: NCSLI Measure Vol. 1 No. 4 (2006). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.structure
  • The publisher's journal page gives the full title of ANSI/NCSL Z540.3-2006 as Requirements for the Calibration of Measuring and Test Equipment. Value: Requirements for the Calibration of Measuring and Test Equipment. Source: NCSLI Measure Vol. 1 No. 4 (2006). Verified 2026-10-27. Record std.ansi-ncsl-z540-3.title

Sources

Obtaining the documents

Changelog (20 entries)
DateRevisionChange
2026-10-27created (std.ansi-ncsl-z540-3.audience)
2026-10-27revised (std.ansi-ncsl-z540-3.audience)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.audience)
2026-10-27created (std.ansi-ncsl-z540-3.designation)
2026-10-27revised (std.ansi-ncsl-z540-3.designation)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.designation)
2026-10-27created (std.ansi-ncsl-z540-3.development-topics)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.development-topics)
2026-10-27created (std.ansi-ncsl-z540-3.revision-of)
2026-10-27revised (std.ansi-ncsl-z540-3.revision-of)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.revision-of)
2026-10-27created (std.ansi-ncsl-z540-3.scope)
2026-10-27revised (std.ansi-ncsl-z540-3.scope)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.scope)
2026-10-27created (std.ansi-ncsl-z540-3.status)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.status)
2026-10-27created (std.ansi-ncsl-z540-3.structure)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.structure)
2026-10-27created (std.ansi-ncsl-z540-3.title)
2026-10-27review_status unreviewed -> software_reviewed (std.ansi-ncsl-z540-3.title)

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Requirements for the Calibration of Measuring and Test Equipment." Test Instrument Reference. 2026-10-27. https://www.testinstrumentreference.com/standards/ansi-ncsl-z540-3/.