Test Instrument Reference

Data record instr.vacuum-interrupter-tester.withstand-method

Verified 2026-10-27 Confidence: High

The go/no-go method applies a direct test voltage across the open contacts and holds it for a set time; if the leakage current stays below a preset limit for the whole time the result is a pass, while a flashover or a current above the limit returns a failure and the voltage is shut off at once.

ProvenanceDoble product page supports data record instr.vacuum-interrupter-tester.withstand-method, which is cited on the entry Vacuum interrupter tester.SOURCEDoble product pageDoble product pageManufacturer pageDATA RECORDinstr.vacuum-interrupter-tester.withstand-methodinstr.vacuum-interrupter..Verified 2026-10-27ENTRYVacuum interrupter testerVacuum interrupter testerNo revisions
Provenance. Where this record comes from and where it is used: the cited source, the record itself and the entry that cites it.
Provenance: the chain from source to entry.
StepItemDetail
SourceDoble product pageManufacturer page
Data recordinstr.vacuum-interrupter-tester.withstand-methodVerified 2026-10-27
EntryVacuum interrupter testerNo revisions
Subject
Vacuum interrupter tester (Instrument classes)
Kind
Instrument fact
Source
Doble product page, web page edition, VBT-75 S2 vacuum bottle tester (Vanguard Instruments), Doble. Publisher page

History

Every recorded change to this data record, oldest first.
DateChange
2026-10-27created
2026-10-27review_status unreviewed -> software_reviewed

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Data record instr.vacuum-interrupter-tester.withstand-method." Test Instrument Reference. 2026-10-27. https://www.testinstrumentreference.com/data/instr.vacuum-interrupter-tester.withstand-method/.