Test Instrument Reference

Data record instr.loop-impedance-tester.no-trip-method

Verified 2026-10-27 Confidence: High

The three-wire low-current (no-trip) method keeps the current through the protective conductor below the tripping level of a residual current device, measuring the line and neutral impedances at high current and only the protective-conductor part at low current; the instrument combines the stages and displays the line-to-protective-conductor value.

ProvenanceMegger Electrical Tester article supports data record instr.loop-impedance-tester.no-trip-method, which is cited on the entry Loop impedance tester.SOURCEMegger Electrical Tester articleMegger Electrical Tester..Manufacturer pageDATA RECORDinstr.loop-impedance-tester.no-trip-methodinstr.loop-impedance-tes..Verified 2026-10-27ENTRYLoop impedance testerLoop impedance testerNo revisions
Provenance. Where this record comes from and where it is used: the cited source, the record itself and the entry that cites it.
Provenance: the chain from source to entry.
StepItemDetail
SourceMegger Electrical Tester articleManufacturer page
Data recordinstr.loop-impedance-tester.no-trip-methodVerified 2026-10-27
EntryLoop impedance testerNo revisions
Subject
Loop impedance tester (Instrument classes)
Kind
Method fact
Source
Megger Electrical Tester article, 2018-07-13 edition, The many facets of loop testing, Megger. Publisher page

History

Every recorded change to this data record, oldest first.
DateChange
2026-10-27created
2026-10-27review_status unreviewed -> software_reviewed

Cite this page

Cite the governing standard for the fact itself; cite this page as the finding aid.

"Data record instr.loop-impedance-tester.no-trip-method." Test Instrument Reference. 2026-10-27. https://www.testinstrumentreference.com/data/instr.loop-impedance-tester.no-trip-method/.